What are the troubleshooting methods of automatic feeding machine?

Automatic feeding machine plays an important role in industrial production, but it may fail due to various reasons. The following are some common automatic feeder failures and the corresponding elimination methods:

1. The charging machine has no power supply: First check whether the power socket and power cable are connected properly, check whether the power switch is turned on, and confirm whether the power supply is normal.

2. The feeding machine does not work normally: check whether the main control board is damaged, if yes, need to replace the main control board; Check whether the motor and transmission are working properly, and if there is a fault, it needs to be repaired or replaced; Check whether the buttons and switches are working properly, and if they are faulty, they need to be repaired or replaced.

3. Uneven material on the feeder: check whether the feeder of the feeder is blocked, and the feeder needs to be cleaned; Check whether the feeding mechanism of the feeding machine is correctly adjusted, and it is necessary to adjust the feeding mechanism; Check whether the feeding device of the feeder is working properly. If there is a fault, it needs to be repaired or replaced.

4. The feeding machine is stuck: check whether the transmission device and feeding device are normal, if there is loose or wear, need to be repaired or replaced; Check whether the feeder of the feeder encounters other objects, and adjust the position of the feeder.

5. The feeder conveyor belt does not rotate: check whether the motor of the conveyor belt is working normally, if it is not normal, the motor needs to be repaired or replaced; Check whether the conveyor belt is stuck and need to clean the stuck object; Check that the belt of the conveyor belt is worn and needs to be replaced.

6. Abnormal sound of the feeding machine: check whether the transmission device and feeding device are normal, if there is loose or wear, need to be repaired or replaced; Check whether the conveyor belt friction with other parts, need to adjust the location of the parts; Check whether the bearing of the conveyor belt is worn and needs to be replaced.

7. The discharge port of the feeding machine is blocked: check whether the discharge port is blocked by the object, and it is necessary to clean the blocked object; Check whether the discharge port is tilted and needs to be adjusted.

8. The feeding machine is cut off: check whether the feeding device and the conveying device are working normally, check whether the feeding device is stuck, and repair or replace the faulty parts are needed; Check whether the powder feeding speed of the feeder is too fast, and it is necessary to adjust the powder feeding speed.

9. Charging machine electronic component failure: check whether the control circuit of the charging machine is working normally, if any electronic component is damaged, it is necessary to repair or replace the faulty component.

10. In the afternoon, the control program of the feeding machine has a problem: check whether the code of the program is correct, and the control program needs to be corrected.

The above are some common automatic feeding machine failures and the corresponding elimination methods, but according to the specific situation may vary, if you encounter an unsolved fault, it is recommended to contact professional and technical personnel for maintenance.