Dehumidification dry feed combination

Features of this machine:

1: Under ideal conditions, the leakage point can reach -40° C

2: Set dehumidification, drying, two-stage feeding triple function together, and can choose the three-stage feeding function a

3: It is suitable for the process plastic raw materials such as PA,PC,PBT,PET, etc., of which optical-grade -OP models can be used to put lenses, LCD backlight plates, optical discs and other optical-grade products

4: The machine is equipped with microcomputer control as the standard installation machine can choose PLC control and LCD touch man-machine interface, centralized operation is convenient, can control the automatic operation of the whole machine

5:SCD European dehumidification drying feed combination is equipped with honeycomb rotation, can get good stability low dew point dry air modeling is divided into semi-open and fully closed open two

6: This series of dehumidification system uses double cooler results to ensure lower return air temperature machine leakage point

7: The machine is equipped with microcomputer control as standard equipment, optional PLC control and LCD touch man-machine interface, centralized operation is convenient, you can control the automatic operation of the whole machine

8: Optical-grade -OP model all raw material contact surfaces are uniformly polished with mirror finish, and the loop sealed feeding system can avoid raw material contamination or moisture return

9: Optical grade -OP model to build a high-performance filter "HEPA" can effectively filter differential ions up to 0.39pm, filtration rate of 99.97%

10: Optical grade - Model with electric eye bucket for powder removal can remove fine powder in raw materials, in the forming of optical grade products can avoid the production of stains

Scope of use:

Set dehumidification, drying, two-stage feeding three functions in one, especially the general absorption of strong engineering plastic raw materials such as; PA,PC,PBT,PET, etc., where the optic-OPM model can be used for the process of optical products such as lenses, LCD backlight plates and optical discs, and the honeycomb wheel can reach the leak point below -40 ° C under ideal conditions

Comparison table of leakage points

Second stage feeding diagram

Three-stage feeding diagram

Suction material is sucked into the dry material bucket from the storage bucket or other storage bin container. When the magnetic spring switch of the vacuum hopper detects no material, the suction motor runs, resulting in a vacuum in the vacuum hopper. The raw materials in the laying bucket are sucked into the vacuum hopper due to the pressure difference of the air. The dried raw material is pumped from the drying barrel to the electric eye hopper installed in the plastic forming machine.